Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 40001EL Performance
At joinery, roofing and assembly firms and in many other sectors where long arm lengths and rapid movements are required the PK 40001 EL Performance can handle any job efficiently and cost effectively. An endless slewing mechanism with two slewing gears and the POWER LINK PLUS endow the crane with maximum mobility. The winch with a lifting capacity of up to 3.5 tonnes impresses with its high working speed.
Max. lifting moment | 39.2 |
Max. lifting capacity | 5000 |
Max. hydraulic outreach | 25.4 |
Max. outreach (with fly jip) | 32.4 |
Slewing angle | ∞ |
Slewing torque with 1 gear | 7.0 |
Fitting space required (std) | 1.36 |
Max. operating pressure | 330 |
Pump capacity | 80 - 100 l/min |
Dead weight (std.) | 3870 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | 35.9 mt | 18.4 m | ∞ | 7.0 | 33.0 Mpa | 80-100 | 3870 kg | 2300 mm | 1400 mm | - | 18000.79 mm | 5000 kg | 1780 kg |
B | 33.1 mt | 21.9 m | ∞ | 7.0 | 33.0 Mpa | 80-100 | 4185 kg | 2300 mm | 1400 mm | - | 21500.79 mm | 5000 kg | 1220 kg |
C | 30.6 mt | 25.4 m | ∞ | 7.0 | 33.0 Mpa | 80-100 | 4475 kg | 2300 mm | 1400 mm | - | 25000.79 mm | 5000 kg | 800 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.